|
|
|
|
The Myryad MXD7000 Digital PreamplifierProcessor has been designed to offer a combination of high quality audio and video performance with simple yet elegant styling. The MXD7000 forms the heart of a highend home cinema and audio system and should be used with high quality power amplifiers such as the Myryad MXA 2150,
MXA 3150, MXA5150 and MXA 7150 two, three, five and seven channel power amplifiers.
|
|
8 channels of 24bit 96kHz delta-sigma DACs
2 channels of 24bit 96kHz delta-sigma ADCs
Optimised audio PCB layout and grounding
24bit 96kHz capable digital input
Analogue sources may be converted to digital at 96kHz
DSP of stereo sources at 96kHz sample rate:
• Bass management
• Advanced tone controls
Advanced Bass and Treble tone controls (with selectable
turnover frequencies – bass 80/110/140Hz, treble 6/8/10kHz)
Video up-conversion:
Composite to S-video
Composite to component video (Y/Pb/Pr)
S-video to component video (Y/Pb/Pr)
Simple intuitive menu system for setup
Comprehensive bass management:
• Hybrid digital/analogue bass management optimises
dynamic range under all conditions
• Crossover frequency can be set between 20Hz and 200Hz in
5Hz steps
• Subwoofer can be fed a “flat” signal to allow the sub’s own
filter to be used
7.1 channel analogue bypass input
Balanced stereo line input – with optional analogue bypass mode
Four Auxiliary line outputs:
2 user programmable:- set independently for each – mix of main
channels, delay, filtering and level
1 infra-bass (for shaker etc.)
1 extra subwoofer output (duplicates main sub output)
Loudspeaker distances can be input in feet or metres
Lip sync correction (audio delay up to 150ms)
Five separate preset setups can be stored (speaker levels, bass
and treble) and assigned to specific sources
Stereo analogue input sensitivities individually adjustable
Analogue Monitor allows metering of stereo input signals levels –
and automatic setting if desired
Comprehensive control of remote trigger outputs from a wide
variety of controlling sources
Supplied with Universal Remote Controls’ “MX-700” remote.
Remote is supplied pre-programmed with all Myryad remote
codes – including “discrete” codes not sent by other Myryad
handsets.
|
 Downloads |
|
| |
|
|
|
|
